Features

1、Nominal pressure:PN < 16MPA

2、Applicable medium: hydraulic oil, water glycol and phosphate ester.

3、Applicable temperature:-30℃~+100℃.

4、The seals are made of domestic and foreign seals, and the user can determine them according to actual needs.

5、Buffer:using gap buffer to adapt to buffering requirements of different working conditions.

6、Deflate:Using deflation screw plug to debug deflation.

7、Mounting connection:There are five installation connections:S type - tail suspension,G type - tripod fixed type,B type-Intermediate swing,T type-head flange,W type-tail flange.

Model description

Ordering instruction

1、When ordering, please write the complete model according to the model description.

2、The general supply status of seals is domestic seals. Please specify if you want to use foreign seals.

3、For the exterior painting of hydraulic cylinders, please specify if there are special requirements for packaging.

4、If you have special requirements for using, please contact our technical department for consultation.

Basic parameters

Optimizing stroke

Weight calculation table

Weight calculation formula M=X+Y*S

Boundary dimensions

Tail suspension(s type) hydraulic cylinder

Bracket fixed type (G type) hydraulic cylinder

注：括号内的尺寸为原标准(JB2162-77)的尺寸，新设计尽量不采用

Middle swing type(B type)hydraulic cylinder

Head flange (T type) hydraulic cylinder

注：括号内的尺寸为原标准(JB2162-77)的尺寸，新设计尽量不采用

Tail flange(W type) hydraulic cylinder