Electromagnetic reversing valve-液压阀-China Shanxi Ocean Hydraulics Co., Ltd.

Electromagnetic reversing valve

Video Display

Description

Property

Electromagnetic reversing valve

Wiring box type

DIN connector type

S-	DSG	-01	-2	B	2	A	-D24	-C	-N^★4	-70	-L
Model	Series	Specifications	Valve location number	Valve Core Spring Arrangement	Valve element type	Mark only with valves in the middle and side positions	Coil type	Manual operation form	Electrical wiring form	Design number	Reverse type of electromagnet
No mark:standard type	DSG: Electromagnetic reversing valve	01	3	C: Spring back	2、3、4、9、10、11、12、40、60	——	Alternating current : A100、A120、A200、A240 Direct current: D12、D24、D48 Alternating current: Ac (dc rectifier) R100、R200	No mark: hand operated putter C: With button lock type	No mark:wiring box type N:DIN with power indicator plug type (optional) N1^★2 :DIN with power indicator plug type (optional)	70	——
			2	D: No spring positioning	2	——					——
			2	B: Spring reset	2、3、8	A^★1:Use the neutral position and electromagnet a power-on position B^★1:Use the neutral position and electromagnet b power-on position					L: Mark only when the electromagnet is reversed

★1、For details on valves using the intermediate position and the side position, refer to "Using the intermediate position and the side position".

★2、N1: DIN with power-on indicator plug type does not have straight-through rectification type (coil type R*)

★3、A valve for phosphate ester is available. However, a special seal (fluororubber) is required for the phosphate ester solution. Please add [F-] in front of the model when ordering.

★4、Special wiring methods include M12-4 pin plug type, valve body center DIN plug type, M12-4 pin DIN connector type and DEUTSCH plug type. (Please refer to the "Special Wiring Method" at the end of the page)