DT/DG remote control relief valve

Description: Connected to the control port of pilot control pressure valve, remote control can be carried out, double or triple pressure control can also be carried out.

Parameters

Model description

Product structure

JIS hydraulic graphic symbol

Base plate

When using the base plate, order it according to the floor model in the table. When the bottom plate is not used, the mounting surface must be machined by 6-S precision.

Attachment

Precautions for use

When making pressure adjustment, first loosen the lock nut, clockwise when supercharging, counterclockwise when depressurizing, slowly rotate the handle.After adjusting the pressure, the lock nut must be tightened.

If the internal volume of the remote control line is too large, vibration may occur. Use a 4 mm inner diameter tube for piping.

The piping in the return tank must not be connected to other valve return pipes, but should be returned directly to the fuel tank.

For remote control of the main valve, after the remote control valve is fully closed, the system pressure is the set pressure of the main valve.

DT-01 

The adjustment pressure is limited by the installed retaining ring. When the working pressure cannot be reached, some retaining rings are removed. One retaining ring is equivalent to 10MPa.

Sealing list